SWELL

SWELL 160 FINAL GRAPHIC - SOLIDS_SWELL SOLID MAKER.jpg
SWELL 160 FINAL GRAPHIC - SOLIDS_SWELL SOLID MAKER BASE.jpg
SWELL 160 FINAL GRAPHIC - SOLIDS_SWELL SOLID MAKER.jpg
SWELL 160 FINAL GRAPHIC - SOLIDS_SWELL SOLID MAKER BASE.jpg
sold out

SWELL

750.00

THE UNSINKABLE WHITE WAVE EXPLORER!

IF THE SWELL WERE A SURFBOARD IT WOULD BE A BIG-WAVE GUN.

The SWELL, with it’s wing-pin tail not only looks ridiculously sick, but every feature was designed to maximize performance in critical no-fall zone areas. The hook-free surf inspired nose tapers 30mm to the tail. At the tail, the wings pull the edge contact away from the snow allowing for quick turns on steep angles. The tail provides support when riding in the back seat but is ultra-maneuverable due to the pin shape.

The Swell employs our patent-pending “Half-Camber” which places camber only in the most critical of areas, then blends a snappy, playful rocker everywhere else.

DURING THE 2018-19 SEASON THE SWELL 160 WILL BE AVAILABLE FOR DEMO AT BRIGHTON SKI RESORT!

Add To Cart

TECH SPECS

IMG_9875.JPG

HALFcamber (TM)

The patent-pending CARDIFF HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control.

IMG_9862.JPG

FLOATilla (TM)

Big float, small board: by placing more surface area under foot and a gradual nose rocker the patent-pending HALFcamber allows us to create shorter boards with more float.

IMG_9865.JPG

NOVERhang (TM)

The patent-pending CARDIFF HALFcamber enables us to create wider-waisted high performance boards that will accommodate larger boot sizes without toe drag.

SMOOTH TURN.jpg

bcDNA

The backcountry is our DNA. All our shapes are designed for big mountain riding whether you are at the resort or 1000 miles from it. Our splits are uniquely and subtly different from our solids because of the conditions they are designed for.

Jackson-Hole-Shapers-Summit-2018-84-of-111.jpg

GROOMtune (TM)

Our solid shapes are backcountry inspired but resort tuned - meaning all our solids have been shaped and adapted to ride on groomed snow.

2017-01-18 15.29.07.jpg

DURATHENE UNIwall

Seamless urethane sidewalls fuse to our cores to create the most durable and damp ride available.

2016-04-06 20.25.37.jpg

SHRedges 2.0

Sharpened and beveled 2.0mm Hardened Rockwell 48 steel edges for maximum durability and precise control.

2016-04-06 20.25.53.jpg

RACEbase

Black graphite infused sintered base for maximized glide and easy repair.

2018-08-14 18.49.43.jpg

SPEEDbumps

Reverse sidecut bumps aligned with the bindings add grip to tighter sidecut radii. Exclusive to the CRANE family of boards.

2018-08-14 18.49.54.jpg

SWALEtail

The patent-pending re-curve of the tail on all CARDIFF splitboards will accommodate a variety of skin tail-clips even those designed only for skis.

2018-08-14 18.55.07.jpg

biLOBA

The patent-pending chamfered inner edge of the split ski at both the tip and tail allow for hook free touring and damage free connection.

7X0A3930.jpg

SPLITtech OPTIMIZED

All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.